RME Intelligent Audio Solutions

TotalMix FX 2.03 / 1.991 - Windows Installer

Notes on version 2.x


General
--------

V 2.0 changes from bitmap-based to a modern graphics engine (the same graphics engine as DigiCheck NG*), thus is now freely scalable from small to full screen, and even zooming into channels is possible. Plus it comes with a new, modern look.

*For this reason the same restrictions apply:

- TM FX 2.x will not run under Windows 7, it requires Windows 10 or higher.

- TM FX 2.x uses Direct3D 12, which was not available before Windows 10, and is not supported by old Intel CPU graphics generations, or similarly old other graphics cards.

- For Mac: TotalMix FX 2.0 uses Metal hardware-accelerated graphic routines, therefore usually requires macOS 10.13 (High Sierra) or up.



Installation
-------------

Follow the instructions of the RME TotalMix FX Install Wizard. This tool installs version 2.0 or 1.991. A restart is not required.


----------------------

News, changes and fixes


V 2.03 / 1.991 (05/29/2026)

- Fix: The Talkback Input fader did not follow the current Submix when Trim was deactivated (only 2.x affected)

- New symbol for Talkback (playback) in the output channel

- Windows only: Help - Device Info - Help file is no longer opened unexpectedly


--------------------------------

V 2.02 / 1.991 (05/20/2026)

- Fixed: Numeric input was not always processed correctly

- Enhanced zoom functions for Matrix (full screen)

- Quick Workspace filenames can now be up to 99 characters Long


--------------------------------

V 2.01 / 1.991 (04/29/2026)

- Fixed the submix selection limit for UFX+ / UFX III in Double and Quad speed modes for MIDI

- The Dynamics plot graphic now updates even when parameters are adjusted via OSC

- Added Gain adjustment via dialog box for stereo (maximum from both channels)

- Gain Dialogs include checking for invalid ranges (e.g., UFX III 1–7 dB)

- Switching between Mixer/Matrix and Toggle retains the old design when accessed from there

- Fixed issue of a blank window when starting TotalMix with changing monitor configurations

- Mac only: Edit dialog in Channel Layout: ESC exits Edit, but does not close the dialog


--------------------------------

V 2.0 / 1.991 (04/15/2026)


Changes since Version 1.99

New Features / Options

- Improved app icons

- Preferences, Graphics, Brightness correction: Added options High Contrast, Highlight submix frame, Light Theme

- Preferences, Snapshots and Workspaces: Added options Load Room EQs with Snapshot, Load Groups with Snapshot, Load Record/Play with Snapshot, Load old Workspaces in old Design

  --- 'Load Groups with Snapshot', aka Fader, Mute and Solo groups. This option allows a more flexible control as the groups are no longer bound to Workspaces alone.

  --- 'Load Record/Play with Snapshot' allows a more flexible control as Record/Play settings are no longer bound to Workspaces alone.


- Preferences, Device Handling: new Option Reduce volume Peaks on Snapshot load

  ---- 'Reduce volume peaks on Snapshot load' improves handling of extreme gain/volume changes between Snapshots, preventing short loud noise bursts.


- Channel Layout Color tints the whole channel, not only the name

- Hotkey R resets the peak markers of all level meters

- The option Load Room EQs with Snapshot also loads Volume Calibration and Delay settings

- The name of the last loaded Room EQ Preset is now shown in the Room EQ window (works only for saved Presets aka Recall list, 1 to 16). The name starts flashing as soon as any parameter is changed.

- Added Ctrl-Z for Undo and Ctrl-Y for Redo

- Open/close state of Recorder panel is saved

- Split position in 2 Row mode is restored

- Now compatible to ARM (Snapdragon)

- Options Ctrl-X and Ctrl-M added to the Functions menu (to pull them from the shadows. They are not new).

- Room EQ windows are cached with size and scale information

- Window sizes are correctly adapted when changing between monitors with different DPI settings

- Nearly all dialogs will now be opened in the middle or above/below the respective element, reducing mouse travel

- On loss of communication with the graphics card (dialog error 207) TM FX now automatically stores the current state and reboots

- Added support for DirectOut’s USB.MADI SFP module

- Mac only: Added support for Copy & Paste in dialogs



Fixes

- All-user option: on save files were generated that were only readable, but not editable for other users.

- DAW mode: display in matrix for Speaker B, wrong routings when changing from DAW to Full.

- Various issues fixed in Matrix view

- REQ windows were wrongly positioned in various situations

- Minimizing the app the REQ windows were not minimized simultaneously – fixed for both taskbar and tray Icon

- Removed several write processes during shutdown that were no longer needed

- ARC USB: Durec Prev/Next were swapped

- ARC USB: Gain adjustment range for channels 11 and 12 corrected for UFX+ / II / III 

- Layout, Submix-only option: show correct channels when routing is changed, e.g., by loading a Snapshot 

- Compatibility fix for ARC USB and others (BCF2000...) for Windows 11 MIDI 2.0

- Added workaround for delayed accessibility after plug-in of the ARC USB

- Windows only: Remote: receiving only SysEx data (not sending) could crash the MIDI port

- Mac only: MIDI Port names can now have a trailing null Character

- Mac only: Added support for special characters in Workspace and Snapshot file names and path

- Mac only: UDP (Remote) communication could crash


Only in TM FX 2.0

- New graphics engine and new design



----------------------


Copyright RME 05/2026
All rights reserved. Windows 10/11 are trademarks of Microsoft Corporation. ASIO is a trademark of Steinberg Media Technologies GmbH. ADAT is a trademark of the Alesis Corp. Arm is a registered trademark of Arm Limited.
