THE HAMMERFALL DSP SYSTEM:

»HDSP RPM
»HDSP MADI
»HDSP 9632

»CardBus/PCI Interface

»Digiface

»Multiface

»Expansion Boards

The Award-Winning Hammerfall DSP System

52 Channel 24 Bit/96 kHz I/O Card

MIDI I/O x 2

SPDIF I/O

ADAT Optical

ADAT Sync

Word Clock I/O

Overview Settings Dialog Technical Specs / Features Unique Technologies Pricing
OVERVIEW HDSP 9652

HDSP 9652 offers 3 x ADAT optical I/O, ADAT-Sync In, SPDIF I/O and word clock I/O. On top, there are 2 MIDI I/Os and TotalMix, a DSP-based real-time mixer/router, with hardware-calculated level metering and complete MIDI remote capability.

Thanks to its unique Zero CPU Load technology Hammerfall DSP guarantees highest performance and lowest latency together with full flexibility!

The HDSP 9652 also supports Expansion Boards (EXB). Two internal ADAT inputs and two internal ADAT outputs allow you to realize up to 16 analog inputs, 16 analog outputs, or up to two TDIF ports directly inside the computer.

The HDSP 9652's Secure BIOS Technology allows to perform hardware updates via software/driver without any risk.

  • 3 x ADAT digital I/O, based on RME's reliable Bitclock PLL
  • 1 x SPDIF digital I/O, based on RME's reliable DIGI96 technology
  • 1 x Breakout cable for coaxial SPDIF operation
  • 1 x Word clock I/O (BNC) on included expansion board
  • 1 x ADAT Sync In (9-pin D-type) for sample accurate transfers
  • 2 x MIDI I/O, 32 channels high-speed MIDI via breakout cable
  • HDSP Meter Bridge: freely scalable level meters, peak- and RMS calculation directly in hardware
  • TotalMix: 1352 channel mixer with 40 bit internal resolution
  • S/MUX poured in hardware: 12 channels 96 kHz/24 bit for record and playback on ADAT optical

...and numerous other features found already in the Hammerfall series. And all this for an unbeatable price!

The Hammerfall DSP System comes with drivers for Windows 98/ME (MME with multi-client operation, ASIO 2.0, GSIF), Windows 2000/XP (full multi-client operation of MME, GSIF and ASIO 2.0), Mac OS 9.x (ASIO 2.0) and Mac OS X (Core Audio, Core MIDI).
 

SETTINGS DIALOG
 
Just click on the hammer symbol in the systray of the taskbar and the settings dialog of the HDSP 9652 comes up. The clear structured, easy to understand window plus the unique informative status windows for input signal, clock mode, sample rate and time code make your work with Hammerfall DSP to a real pleasure. With a simple mouse click you gain access to the full power of your card.

When working with several digital sources it is not only necessary to know if these are properly locked, but also if they are totally synchronized. RME's exclusive SyncCheck checks all input signals and displays their actual state, and thanks to our new Intelligent Clock Control concept you have all clocks and states under control - with ease.

A display of the time code at the ADAT Sync-In port offers a quick check of the communication between external device and Hammerfall.
TECHNICAL SPECIFICATIONS AND FEATURES
 
Supported sample rates: 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, variable
8 buffer sizes/latencies available: 1.5 ms, 3 ms, 6 ms, 12 ms, 23 ms, 46 ms, 93 ms, 186 ms
ASIO zero CPU load technology: 0 (zero!)% CPU load when using ALL 52 channels!
All settings changeable in realtime
Clock modes slave and master
Automatic and intelligent master/slave clock control
Enhanced Mixed mode: All inputs and outputs simultaneously operational
Unsurpassed Bitclock PLL (audio synchronization) in ADAT mode
Enhanced Zero Latency Monitoring for latency-free submixes and perfect ASIO Direct Monitoring
Comes with DIGICheck: the ultimate measurement, analysis and test tool
Input 3 x optical (TOSLINK), 1 x coaxial (Cinch), 2 x MIDI, word clock (BNC)
Input format SPDIF, AES/EBU (Consumer, Professional), ADAT optical
Output 3 x optical (TOSLINK), coaxial (Cinch), 2 x MIDI, word clock (BNC)
Format output SPDIF, AES/EBU (Consumer/Professional), ADAT optical
UNIQUE TECHNOLOGIES IN HDSP 9652
  • AutoSync:
    Intelligent clock control according to operational mode and present/desired sample rate.  
     
  • Bitclock PLL
    The most reliable receiver circuit for ADAT optical signal.
     
  • Dynamic Bus Utilization
    Scalable computer load according to the current usage.
     
  • DIGICheck DSP
    Professional status and level display at lowest CPU load.
     
  • Intelligent Clock Control
    Measurement and display of all incoming and used clocks.
     
  • Latency Fast Change
    Change latency on-the-fly under ASIO, without manual reset or re-boot.
     
  • Secure BIOS Technology
    Automatic BIOS replacement when flash process fails.
     
  • SyncAlign
    Surveillance and sample accurate synchronization of all channels.
     
  • SyncCheck
    Comparison and display of all input clock status.
     
  • TotalMix
    Mixes all inputs and all playback channels to any hardware output. Up to 13 independent submixes.
     
  • Zero Latency Monitoring - ZLM
    Monitoring of the input signal with zero latency.

A complete overview of all the unique technologies in the Hammerfall series can be found here.
 

PRICING

See your local distributor's website for current price information.

Home    News    Audio Converters    Sound Cards    MADI Series    DIGICheck   Mic Preamps
Accessories
    Support    RME Newsgroup    Company Info    Purchasing    Downloads    Links

Copyright 2005 RME. All rights reserved. RME is a registered trademark.
This website contains names and marks of other companies.